We all have some understanding of fertilizer manufacturing equipment. In fact, in the process of crushing fertilizer production, the organic fertilizer crusher uses the weight of the material itself, falls into the high-speed rotating chain in the crushing chamber of the vertical crusher through the feed inlet, and casts the material to the inner wall of the cylinder with the help of the centrifugal force of the rotor of the vertical crusher, so that the material is in the rebound and gravity Under the combined action, the crushed materials rotate rapidly in the inner cavity of the vertical mill.
At the same time, the material falls down and collides violently with the impact plate installed on the inner wall of the vertical crusher and collides with each other, causing the material to break or produce a large number of cracks; then the material enters the grinding cavity of the first layer of the vertical pulverizer, and the material falls in a spiral shape. After pressing and extruding, the cracked material is further broken, and then the refined material continues to move downward, and then enters again Enter the second layer grinding area of vertical mill.
The materials have been subjected to impact crushing and grinding and crushing. Due to the resistance produced by the inlet and outlet of the grinding area, the powder is in a closed grinding state in this area, so that the fineness of the material is below the millimeter level. When the material is discharged through the discharge port, the average particle size can reach about 1 mm. It meets the processing requirements of organic fertilizer granulator.