The depth of the chain plate tipping machine is 1.8-2 meters, and the general rake tooth tipping machine is 0.6-1.5 meters. The chain plate flipping machine occupies a small area and has higher efficiency. Advantages of chain plate flipping and throwing machine equipment: This chain type flipping and mixing machine has advantages such as high crushing efficiency, uniform mixing, thorough flipping, and long moving distance. The chain plate flipping machine and the new chain plate flipping machine have a compact structure and advanced technology. They utilize the characteristics of some beneficial microorganisms to promote the rapid decomposition of organic waste such as livestock and poultry manure. They adopt a unique pool type continuous aerobic fermentation technology to quickly decompose, remove water, sterilize, and deodorize organic waste, achieving the goal of harmless, resource utilization, and reduction treatment, with low energy consumption and stable product quality.
Installation and debugging of chain plate stacker equipment
1. After all the components of the chain plate stacker equipment are installed and assembled, we need to fix the conveyor chain plate in place to ensure that all the legs, columns, and platforms of the conveyor are fixed with chemical anchor bolts. This step is very important, and the equipment can only work safely when it is relatively stable. Therefore, we must carry out this work well.
2. After the previous step of the chain plate stacker is completed, we cannot loosen it. We also need to check all the bolts and make a thorough fixation to ensure that each screw is fixed properly. If one screw is not fixed properly, it may pose a safety hazard.
3. The axis lines of the drag axis, transmission drum, and directional drum of the chain plate stacker must be kept perpendicular to the vertical centerline of the frame, otherwise it cannot rotate flexibly. Therefore, these three items must be checked clearly, which is also a very important item.
4. The chain plate stacker needs to check the tension of the conveyor chain plate. If we want to check the tension, we need a set of data. The formation of tension should be between 1% and 1.5% of the captain, which is more suitable. We need to maintain this data well, and if it exceeds this range, we need to adjust it in a timely manner.
5. The chain plate stacker has a pull rope switch that needs to be installed on one side of the equipment. There should be a steel wire rope connecting the two switches, and the tension can be adjusted by oneself.
6. The chain plate stacker also has a switch that is a deviation switch, which can be installed on both sides of the head and tail, and is also installed in pairs. The specific position should be according to the manual.